Feed particle size: less than 200mm
Discharge particle size: less than 3mm (90%)
Production capacity: 15-200t/h
Dear customer Double rotor crusher, we are glad that you have found us in a wide range of information! Here is the relevant information organized by Double rotor crusher for you.
The double rotor crusher is a type of ultra-fine crusher developed based on the current demand in the field of modern sand and stone orthopedic fine crushing. It is also known as the double rotor hammer crusher. The double rotor crusher is an innovative non castor bar crusher equipment in the hammer crusher market. It has the characteristics of large output, uniform discharge particle size, large crushing ratio, long service life of high alloy wear-resistant hammer head, 15% water content in high humidity materials, no blockage, one-time discharge of less than 3mm, high sand discharge rate, low dust, and low noise.
Suitable for crushing wet materials such as coal slag, furnace slag, slag, shale, coal gangue, construction waste, and construction waste in calcite, limestone, and brick and tile factories, solving the problem of using gangue and coal slag as additives and internal fuel in brick factories; The difficulty of crushing high moisture materials for producing standard bricks and hollow bricks using gangue and shale.
Double rotor hammer breaking is equivalent to combining two hammers into one, reasonably combining them into a whole, and using two sets of rotors in series. Under the drive of dual motors, two sets of rotors connected in series rotate at high speed simultaneously. The material is immediately crushed by the hammer head of the rapidly rotating lower rotor in the inner chamber of the machine. The materials in the inner chamber collide and crush each other rapidly, achieving the effect of hammer powder and material powder, forming coal slag particles with a discharge particle size of less than 3 millimeters.
The dual rotor crusher can customize equipment of different sizes and models according to user needs, solving the problem of difficult crushing of wet materials. It can be used normally even on rainy days. Through the crushing of upper and lower dual rotor crushers, materials can be fully and effectively finely crushed. The fineness of the discharge of the dual rotor crusher can also be freely adjusted according to user needs, which is convenient, fast, and suitable for use and purchase.
1. There is no sieve bottom, high humidity materials contain 15% water, are not clogged, have less dust, and low noise.
2. Combination type high alloy wear-resistant hammer head, one pair of hammer heads replaces the traditional forging hammer head with three sets of hammer heads.
3. After the reform, the method of only replacing the hammer head without changing the handle makes it more convenient and efficient to replace the hammer head,
4. Using an electric hydraulic opening device, one person can easily complete the operation, maintenance, and replacement of components of the machine.
5. Unique displacement and clearance adjustment technology, the double rotor hammer does not need to be repaired after the hammer head is worn out. It can be used repeatedly in the moving position, and the utilization rate of the hammer head can reach 75%.
6. Bidirectional rotation, through continuous equal shift and bidirectional operation, can evenly wear and tear the hammer head and the crushing gear plate, reducing the frequency of stopping and replacing vulnerable parts.
7. The crushing ratio is high, the output is high, the discharge particle size is fine and uniform, and the energy consumption is low. It can crush more than 20 tons of materials per hour, and the cost of crushing per ton of coal slag does not exceed 1.8 yuan.
| Model | Feed particle size（mm） | Discharge size（mm） | Production capacity（t/h） | Material moisture content | Motor Power（kw） |
| 2PCX 400x600 | ≤80 | ≤3mm (95%) | 8-15 | ＜35％ | 22+22 |
| 2PCX 600x600 | ≤100 | 10-30 | 45+45 | ||
| 2PCX 600x800 | ≤100 | 20-40 | 75+75 | ||
| 2PCX 800x1000 | ≤100 | 30-55 | 90+110 | ||
| 2PCX 1000X1000 | ≤120 | 45-80 | 132+132 | ||
| 2PCX 1000X1200 | ≤120 | 80-100 | 160+160 | ||
| 2PCX 1000X1400 | ≤120 | 100-120 | 185+185 |
Why do you choose Maoxin Machinery to call and cooperate? The key word "win-win" coal crushing Double rotor crusher service provider -- Maoxin Machinery advocates "win-win cooperation", which means to achieve win-win both internally and externally. Internally, it is Maoxin Machinery employees themselves. The company creates a good atmosphere, ambitious goals, creates a comfortable Maoxin Machinery corporate culture environment, employees achieve their own career goals and growth, and Maoxin Machinery achieves their interests goals, which is a virtuous circle of "win-win cooperation". Externally, Maoxin Machinery has created good coal crushing Double rotor crusher products and services, and customers have been recognized, providing good service experience for coal crushing Double rotor crusher customers, which is also "win-win", and the sense of trust has been further strengthened. This is Maoxin Machinery complementary ecological win-win.
Precision casting quality！Speak less and do more! No amount of rhetoric and packaging planning can match putting in effort on products!Maoxin precipitates the brand value of Double rotor crusher through daily actions!
|
|
Hi,Auckland friends,Maoxin Machinery receive enquiries in English, Español (Spanish), Русский язык (Russian), Français (French) and العربية (Arabic). Our coal crushing professional team will reply to you within one business day. Please feel free to contact us!
Jaw crusher
Reversible crusher
Wood shredder