Feed particle size: less than 200mm
Discharge particle size: less than 3mm (90%)
Production capacity: 15-200t/h
Dear [Double rotor crusher] customer! You are the 124531 guest visiting Maoxin enterprise! Innovation is in Maoxin's DNA! Maoxin has been committed to technical exploration and experience accumulation in construction waste crushing since its establishment, and has provided superior [Double rotor crusher] products to hundreds of customers!
The double rotor crusher is a type of ultra-fine crusher developed based on the current demand in the field of modern sand and stone orthopedic fine crushing. It is also known as the double rotor hammer crusher. The double rotor crusher is an innovative non castor bar crusher equipment in the hammer crusher market. It has the characteristics of large output, uniform discharge particle size, large crushing ratio, long service life of high alloy wear-resistant hammer head, 15% water content in high humidity materials, no blockage, one-time discharge of less than 3mm, high sand discharge rate, low dust, and low noise.
Suitable for crushing wet materials such as coal slag, furnace slag, slag, shale, coal gangue, construction waste, and construction waste in calcite, limestone, and brick and tile factories, solving the problem of using gangue and coal slag as additives and internal fuel in brick factories; The difficulty of crushing high moisture materials for producing standard bricks and hollow bricks using gangue and shale.
Double rotor hammer breaking is equivalent to combining two hammers into one, reasonably combining them into a whole, and using two sets of rotors in series. Under the drive of dual motors, two sets of rotors connected in series rotate at high speed simultaneously. The material is immediately crushed by the hammer head of the rapidly rotating lower rotor in the inner chamber of the machine. The materials in the inner chamber collide and crush each other rapidly, achieving the effect of hammer powder and material powder, forming coal slag particles with a discharge particle size of less than 3 millimeters.
The dual rotor crusher can customize equipment of different sizes and models according to user needs, solving the problem of difficult crushing of wet materials. It can be used normally even on rainy days. Through the crushing of upper and lower dual rotor crushers, materials can be fully and effectively finely crushed. The fineness of the discharge of the dual rotor crusher can also be freely adjusted according to user needs, which is convenient, fast, and suitable for use and purchase.
1. There is no sieve bottom, high humidity materials contain 15% water, are not clogged, have less dust, and low noise.
2. Combination type high alloy wear-resistant hammer head, one pair of hammer heads replaces the traditional forging hammer head with three sets of hammer heads.
3. After the reform, the method of only replacing the hammer head without changing the handle makes it more convenient and efficient to replace the hammer head,
4. Using an electric hydraulic opening device, one person can easily complete the operation, maintenance, and replacement of components of the machine.
5. Unique displacement and clearance adjustment technology, the double rotor hammer does not need to be repaired after the hammer head is worn out. It can be used repeatedly in the moving position, and the utilization rate of the hammer head can reach 75%.
6. Bidirectional rotation, through continuous equal shift and bidirectional operation, can evenly wear and tear the hammer head and the crushing gear plate, reducing the frequency of stopping and replacing vulnerable parts.
7. The crushing ratio is high, the output is high, the discharge particle size is fine and uniform, and the energy consumption is low. It can crush more than 20 tons of materials per hour, and the cost of crushing per ton of coal slag does not exceed 1.8 yuan.
| Model | Feed particle size（mm） | Discharge size（mm） | Production capacity（t/h） | Material moisture content | Motor Power（kw） |
| 2PCX 400x600 | ≤80 | ≤3mm (95%) | 8-15 | ＜35％ | 22+22 |
| 2PCX 600x600 | ≤100 | 10-30 | 45+45 | ||
| 2PCX 600x800 | ≤100 | 20-40 | 75+75 | ||
| 2PCX 800x1000 | ≤100 | 30-55 | 90+110 | ||
| 2PCX 1000X1000 | ≤120 | 45-80 | 132+132 | ||
| 2PCX 1000X1200 | ≤120 | 80-100 | 160+160 | ||
| 2PCX 1000X1400 | ≤120 | 100-120 | 185+185 |
Eastern Europe crusher Double rotor crusher regional security service provider--Maoxin Machinery Sengra cross-border product service station What are the advantages of cooperation? The business philosophy of "integrity and win-win" Maoxin Machinery can be summarized into eight words: "honesty and win-win development". Maoxin Machinery has always implemented this concept well for both its internal employees and external Double rotor crusher partners, thus gaining long-term good business reputation and cooperative relations in the construction waste crushing field, and promoting the stable development of Maoxin Machinery.
Strengthen the construction of international teams and serve customers from all continents！ Maoxin , take building the brand as its important task, and make a small contribution to manufacturing all over the world! Eastern Europe crusher Double rotor crusher regional security service provider--Maoxin Machinery Sengra cross-border product service station ，Since its establishment, Maoxin Machinery has been rooted in the field of [construction waste crushing], and has created [Double rotor crusher] series products of high performance! Every call you make, every cooperation, is the driving force for Maoxin to move forward! Bless customers Wishing you every good fortune that comes your way!
There are many historical and cultural heritages in China. I believe these cultural stories with a long history are attractive enough to make Sengra friends interested in Chinese Double rotor crusher products.
If you have an interest in Chinese culture, let's take a look at it first.
The Mausoleum of the First Qin Emperor, also known as the Qin Shi Huang Mausoleum, is a historic site located in Lintong District, Xi’an, China. It is the final resting place of Qin Shi Huang, who was the first emperor of China and the founder of the Qin Dynasty.
The mausoleum complex covers an area of over 56 square kilometers and is surrounded by several smaller tombs, pits, and burial sites. The main tomb is located at the center of the complex and is comprised of a pyramid-like structure that rises over 50 meters high. The tomb was constructed during Qin Shi Huang's reign and took nearly 40 years to complete.
The tomb is surrounded by a moat and an outer wall that is over 1.5 kilometers long, with four gates that guard the entrance to the tomb. The tomb is also guarded by an army of life-sized terracotta soldiers, horses, and chariots that are positioned facing eastward, ready to protect the emperor in the afterlife.
Still browsing or ready to discuss? Our experts will help you find the best solution for your specific needs.
Jaw crusher
Reversible crusher
Wood shredder