The construction waste crushing production line mainly consists of various specialized equipment such as vibrating feeders, jaw crushers, heavy-duty third-generation sand making machines, vibrating screens, etc. According to the production process of construction waste, concrete, waste bricks, stones, etc. in construction waste are processed and processed to achieve resource reuse.
During the production process, concrete, waste bricks, stones, etc. in construction waste are roughly crushed in a jaw crusher, then finely crushed in the construction waste crusher, and then screened through a vibrating screen. Qualified stones enter the dry magnetic separator through a belt conveyor for iron removal treatment, while unqualified stones enter the construction waste crusher again for crushing, forming a closed loop to ensure the quality and specifications of the stones.
The construction waste crushing production line is an improvement on the old hammer crusher, which is a combination of two hammer crushers. The reasonable combination forms a whole, with a beautiful appearance and strong practicality. The principle of upper and lower two-stage dual rotor crushing is adopted.
1. There is no screen or grate bottom, and the range of crushing raw materials is wide. There is no requirement for the moisture content of dry and wet materials.
2. The material is crushed in both upper and lower stages. After passing through the first stage of crushing, it enters the second stage of crushing. The material forms a hammer powder in the chamber of the crusher, and the effect of the powder material is directly discharged from the discharge port.
3. The original two-way gap adjustment technology is adopted. When the hammer head is worn, adjust the position of the hammer head to ensure the gap between the hammer head and the lining plate and ensure the effect of discharging particle size.
4. The device has a balancing device, which can save 20% of electricity and also enhance the crushing force of the hammer head. Increased production.
5. Change the traditional grease nozzle for oil injection. Now it has been improved to a centralized lubrication system, and oil can be injected without stopping the machine.
6. The hydraulic starter housing is used, which can be easily opened by one person, making maintenance and inspection of components convenient and fast.
Jaw crusher
Reversible crusher
Wood shredder